SGA01K CONTACT TREATMENT GREASE 2G

 SGB (2X Grease) was developed as an extension of the No 2 Range (SFA, SGA and SOA) with increased plastics compatibility. This product development was necessary due to the use of thermoplastics in the electronics and automotive industries. SGB will significantly increase contact performance and lifetime.

RAKU-TOOL MB 0670 1500*500*100MM

 

The Raku Tool 42lb MB-0670 styling and working board is great for master and cubing models as well as pattern models.

The MB-0670 offers a fine surface structure and low coefficient of thermal expansion along with good dimensional stability. This board is easily shaped and machined.

LRM Label Remover, 200ml Aerosol

Label Remover has been specially formulated for the quick and efficient removal of paper based pressure sensitive adhesive labels. LRM is 100% Ozone Friendly.

• Paper label remover

• Harmless to most plastics

 
x

Loctite 242

 

LOCTITE 2400 Loctite 2400 NA Threadlocker

 Perekat Pengunci ulir - kekuatan sedang. Lembar data keselamatan bahan putih, tanpa label. Cocok untuk semua rakitan logam berulir.

LOCTITE® 2400 merupakan pengunci ulir sedang yang diformulasikan untuk mengamankan dan menyegel baut, mur dan pengancing untuk mencegah kelonggaran karena getaran. Bekerja pada semua logam dan substrat pasif. Sedikit kontaminasi oleh minyak industri, minyak pencegah korosi dan fluida potong yang ditolerir. Pembeda kuncinya adalah Lembar Data Keselamatan Bahan “Putih”. LOCTITE 2400 membawa simbol tak berbahaya, frasa aman dan resiko dan tidak mengandung karsinogen apapun yang harus dilaporkan, mutagen atau racun reproduksi.

Simbol tak berbahaya, frasa tak beresiko & frasa tak aman; Lembar Data Keselamatan Bahan “Putih”

Mencegah kelonggaran pada rakitan bergetar misalnya pompa, gear box (kotak roda gigi) atau alat kempa

Mengijinkan pembongkaran biasa

Persetujuan WRAS (BS 6920): 1104507

Improved cure strength on zinc-flake coated steel

Improved cure speed on inactive substrates

Thread size = M36

WAX SHEET 266 2.0MM

Sheet Wax is used primarily to simulate metal or part thickness when making metal forming dies or punches, resin transfer molds (RTM), or any two- part molds where a uniform part thickness is desired.

.

Formulated and manufactured by Freeman to a uniform thickness of ±.001 inch, our wax sheets can be ordered with or without an adhesive back. They are also available in a regular temperature formulation, which features greater durability, depression resistance, and translucency (in thinner sheets) and a high temperature formulation, which features maximum flexibility and natural draping characteristics.

 

UAT Universal Acrylic Conformal Coating Thinners

UAT

Universal Acrylic Conformal Coating Thinners

Product Description

UAT Universal Acrylic Conformal Coating Thinners is a high purity solvent blend designed for use with all Electrolube acrylic based coatings. Electrolube coatings suitable for use with UAT are:

HPA – High Performance Acrylic

APL – Acrylic Protective Lacquer

TRV – Tropicalised Varnish

The primary use of UAT is to dilute coatings for use in dip and spray coating applications however it can be used to clean coating equipment which has been used with the above coatings.

For the correct mix ratios please refer to the TDS.

UAT is a high purity solvent blend designed for use with all Electrolube acrylic based conformal coatings.

Product Codes

UAT05L - 5L Bulk

Key properties

• Used to dilute acrylic conformal coatings for use in dipping and spraying applications
• Normal thinning ratio for spraying applications is 2 parts coating to 1 part thinner

 

Electronic Cleaning Solvent

Electronic Cleaning Solvent

IPA is a cleaning solvent which is internationally approved to standards required by the major electronics manufacturers.

Product Description

IPA Electronic Cleaning Solvent  is an internationally approved cleaner which meets standards required by the major electronics manufacturers. The product is designed for use where the application of CFC based solvents is undesirable. IPA will clean thoroughly all electronic equipment and is safe to use on most plastics. IPA is 100% Ozone Friendly.

Key properties

• Efficient general purpose electronic cleaning solvent
• Removes contamination from PCBs
• Excellent plastics compatibility
• Economic in use

 

GDP High Powered Air Duster

Product Description

Electrolube’s Airduster aerosols of pure, compressed, inert gas are designed for the safe removal of dust and airborne contamination from very delicate or unaccessible areas of electrical and electronic equipment. Electrolube’s Airdusters are non-flammable, non-CFC and non-HCFC products.

GDP should be used in a vertical upright position or at an angle of not greater than 60° to the vertical otherwise a freezing effect will result. If it is necessary to tilt the aerosol more than this, use an invertible version, such as EADPI.

Key properties

• High powered, inert pure compressed gas airduster
• Powerful initial blast and minimal drop off
• Use to remove dust and dirt from delicate and inaccessible areas
• Non-flammable
• Extension straw for precision of the blast

 

FRICTION DUST Is Formulations For Brake Linings

FRICTION DUST

   

 

Friction Dust is made from cashew nut shell liquid, used in metallic, semi-metallic, non-asbestos organic (NAO) and asbestos formulations for brake linings, disc pads, clutch facings and brake blocks.

   

 

Friction Dust improves wear and fade resistance, decomposing at various elevated temperatures thereby providing good flexibility and thermal stability in friction materials.

   

  LIQUID RESINS

   

 

Cashew modified phenolic liquid resins are used in various friction material applications like brake blocks, disc pads, brake linings, clutch facings.

 

Lem Besi 2 Komponen Kuat dan Tahan Lama

Lem Besi Bondite Rapid

Bondite Rapid 90 Minutes, 5 minute, 4 Minute

BONDITE SLOW SETTING EPOXY ADHESIVE STANDARD 90 MINUTES FOR METAL, GLASS, CERAMICS, PLASTIC & CONCRETE
The fast-setting, high strength and gapfilling epoxy adhesive for use in:
Household and industry. the cured adhesive is waterproof and chemically resistant. The adhesive will bond most materials to themselves or to one another.
Especially for metal, wood, glass, ceramics, rigid plastics, concrete. Not to be cured at temparatures below 5 degree celcius.

Mantap Hebat Tahan Lama Dan Kuat Lem Besi Terbaru

Barang Import